Special Lubricating Oil for Air Compressor, Full Synthetic, Long-Lasting & Energy-Saving, Anti-Carbon Deposition & Anti-Emulsification, Universal Fit, Air Compressor Synthetic Oil, Screw Compressor Oil

Core Pain Points: Troubled by air compressor lubricating oil emulsification, excessive carbon deposition, frequent oil changes, soaring energy consumption, and main engine wear? Industry data shows that 70% of air compressor main engine failures are caused by improper lubricating oil selection or low-quality oil. Low-quality air compressor special lubricating oil can shorten bearing life by more than 50%, increase energy consumption by 18%, reduce the oil change cycle to less than 4000 hours, and increase annual hidden costs by more than 150,000 yuan. What's worse, using ordinary engine oil instead of air compressor synthetic oil will generate carbon deposits within 300-500 hours, leading to main engine seizure with maintenance costs exceeding 10,000 yuan, seriously affecting production efficiency. In addition, screw compressor oil with poor anti-emulsification performance will form emulsion, causing oil film rupture and accelerated rotor wear, while low-flash-point low-quality air compressor lubricating oil also has the hidden danger of flash combustion, failing to meet industry safety standards.

Core Selling Points (Data Supported): Our special lubricating oil for air compressors is strictly produced in accordance with the new national standard GB/T12691-2021 and meets the international standard DIN51506, suitable for all types of air compressors such as screw, piston, and centrifugal types, providing a one-stop solution to core industry pain points, and is the first choice for high-quality air compressor synthetic oil and screw compressor oil. Adopting high-end PAO (polyalphaolefin) base oil compounded with polyol ester, combined with special anti-wear, anti-oxidation, and anti-foam additives, the viscosity index is ≥140 (far exceeding the new national standard requirement of ≥120 for screw compressor oil), Noack evaporation loss ＜8%, excellent oxidation stability, RBOT (Rotating Bomb Oxidation Test) life over 300 minutes, and the oil change cycle is extended to 8000-12000 hours, 150% longer than ordinary mineral oil and 60% longer than low-quality synthetic oil, greatly reducing oil change frequency and maintenance costs, and the cost-effectiveness is far superior to ordinary air compressor lubricating oil.

Excellent anti-emulsification performance, oil-water separation time ≤30 minutes under GB/T7305 standard, as low as 15 minutes under high humidity conditions (humidity ＞60%), effectively avoiding cooling failure and component corrosion caused by oil-water emulsification. High-efficiency anti-carbon deposition and anti-sludge, sludge content after oxidation ≤0.05% (meeting the new national standard carbon residue limit), which can completely eliminate carbon deposition and blockage in the compression chamber, reduce exhaust resistance, and form a stable oil film with maximum non-seizure load (PB value) ≥850N, anti-wear performance improved by 35%, reducing rotor and bearing wear, and extending main engine life to more than 20000 hours. Closed-cup flash point ≥200℃ (for screw compressors), effectively avoiding oil vapor flash combustion under high temperature (150-220℃) in the compression chamber, improving equipment operation safety. The friction coefficient is ≤0.08, 33% lower than ordinary oil products, which can reduce motor load and help air compressors save energy by 3%-8%. A 75kW air compressor can save 24,000-62,000 kWh of electricity annually, with outstanding long-term cost-effectiveness.

Covering full viscosity grades of ISO VG32/VG46/VG68, suitable for different working conditions: VG32 for low-temperature environments (＜5℃), VG46 for normal temperature environments (5-35℃) (suitable for more than 80% of screw compressors), and VG68 for high-temperature environments (＞35℃). Perfectly compatible with mainstream models such as Atlas Copco, Sullair, and Ingersoll Rand, widely used in industrial scenarios such as factories, mines, building materials, semiconductors, and chemicals, able to cope with harsh working conditions such as high humidity, high dust, and corrosive gases, with no deterioration, no carbon deposition, and no leakage during long-term operation.

Company Strength: We are a professional one-stop supplier of air compressor filters and parts with more than 10 years of industry experience. Factory direct sales eliminate all intermediate links, and the price of air compressor special lubricating oil and screw compressor oil of the same quality is 15%-20% lower than peers, with significant cost-effectiveness advantages. All air compressor synthetic oils have passed online near-infrared spectroscopy testing and air compressor bench simulation working condition testing, with CNAS-certified third-party test reports, and the factory pass rate is 100%. All products enjoy a one-year warranty, with free return, replacement and replenishment for non-human quality problems. Professional engineers provide one-on-one selection guidance, accurately matching viscosity and air compressor lubricating oil product models according to customer equipment models and working conditions, with dual guarantees of quality and price, making foreign trade procurement more worry-free and use more assured, completely solving the worries of air compressor lubrication.